Hidroten Electric PVC Ball Valve | EPDM Seals | AVA Basic Electric Actuator | Fail-Safe 110-240V | Imperial socket ends

Hidroten fail safe electric ball valve assemblies, imperial PVC/EPDM, fitted with the lightweight and compact 110V/240V AVA electric actuator, built and tested from stock by the valve actuation specialists All Valves Online in the UK.

_________________________________________________________________________________

Perfectly matched to PVC electric ball valves, the AVA electric actuator produces a light weight and compact actuated valve assembly that typically requires no more pipe work support than the valve without the electrical actuator. The internal capacitor fail safe system adds virtually no extra weight.

Manufactured in the EU by Hidroten, these 2 way PVC electrical ball valves have PTFE ball seats, EPDM seals and with imperial end connections.

Hidroten designed and manufacture custom mounting kits to enable the mounting of AVA electric actuators, with a wrap-around style kit up to 11/2", and a top mounted moulded bracket for 2" and above. 2 Way Hidroten PVC electrically actuated ball valves are available with full flow up to 3", the 4" valve is reduced bore.

110V-240V AVA electric actuators offer open/close operation with capacitor fail safe to close the valve on loss of power, with a local visual mechanical position indicator, space heater, end of travel confirmation switches, emergency hand operation and are supplied pre-wired with a 0.8m multi-core multi-colored cable. Every Hidroten PVC electric is built and tested by All Valves.

Unsure of the suitability of PVC and either EPDM or Viton seals for your intended duty?  Check using our Chemical Compatibility Chart here.