Global brand of thermoplastic valves - FIP quality, made in Italy
FIP Series: FK Butterfly industrial butterfly valve series
FIP FK Butterfly Valve (DN40 - DN300)
- Used for On/Off and control operation
- Size range from DN40 up to DN300
- Pressure rating: Maximum working pressure: up to 16 bar at 20°C
(water) - DN50 and above up to 10 bar at 20°C (water)
- Body material GR-PP; UV resistant
- Full flanged body with oval holes to fit various flanging standards.
Supplied with hole inserts for bolt hole centralising (up to DN 200;
DN 250 & 300 are drilled according to the flange drilling required)
- Lever operated versions are fitted with a handle locking device
(with 10 ratchet positions at 10º intervals for regulating flow)
- Option to install gearbox or actuator to the valve upper flange with
standard ISO drillings
- Optional fully lugged version with threaded 316 Stainless steel inserts
to BS-EN 1092 PN10 (Formally BS4504) or ANSI 150
- Maintenance can be carried out while the valve body is installed in line
* Also available as electrically or pneumatically actuated
| Type |
Manual Plastic Butterfly Valve Series |
| Body Material |
PP-GR
|
| Disk Material |
ABS |
| Seal Material |
EPDM (Viton available as an option) |
| Pipe Size |
DN125 |
| Port Size |
DN125 |
| Pressure Rating |
10 bar |
| Media Working Temperature |
0°C to +60°C |
| ISO 5211 |
Only via actuation kit (see accessories tab) |
| Valve Approvals |
Valve made from WRAS approved materials |
| Operator |
Lever Operated |
| Manufacturer |
FIP |
| Country of Origin |
Italy |
| Weight |
4.70Kg |
| Series |
FIP FKOA/LM LUG ANSI LUG ISO Series |
| Part Number |
H0FKAX11 |
There are no associated accessories for this item.
| PDF |
link |
FK DN40-300 ABS Technical Datasheet |
| IOM |
link |
Download Installation, Operation & Maintenance |
| CERT |
link |
Download product related Certification |
| 3D/2D |
link |
Download product related Certification |
There are no videos available for this item.
There are no associated spares for this item.